10-Step Carpet Cleaning Method

Step 1: Pre-Inspection– Our Technician will do a walk through inspection with you to identify soiling conditions, carpet construction, and potential permanent stains.

Step 2: Pre-Vacuum – Your carpet is pre-vacuumed with a commercial vacuum to get rid of bonded, insoluble dry soil.

Step 3: Pre-Spot – Certain spots are pre-treated for maximum removal.

Step 4: Pre-Spray – Traffic areas are pre-treated with a Traffic Lane Treatment.

Step 5: Pre-Groom – Your carpet are pre-groomed with a carpet groomer or rotary cleaning machine (depending on soil level) to further loosen traffic area soil.

Step 6: Extract and Rinse – Once the soil has been disentangled, our truck-mounted hot water extraction cleaning method will completely flush the carpet pile. Pressure and heat are regulated to prevent the carpet from being over-wet.

Step 6a: Neutralize – The pH scale is balanced on every carpet and fabric cleaned. This is often one of the foremost vital steps according to the manufacturers of carpet. It is accomplished during the extract & rinse process or a post spray will be applied.

Step 7: Post Spot Treatment – If any spots don’t seem to be removed during cleaning process, specialty spotting techniques are employed. Note: Potential permanent stains, as identified by technician may not be removed.

Step 8: Post Grooming – The Carpet pile is set in one direction to aid the drying process.

Step 9: Speed Dry – High velocity air movers are placed on the carpet to reduce drying time.

Step 10: Post Inspection – Our technician will walk through your home with you to point out the cleaning results and ensure that you are completely satisfied with the job!